Welcome to Stubby's Texas Brewing Inc.



Toggle Block Social


Featuring a large, easy to read 3" face, this thermometer is great for installation in mash tuns, boil kettles, and hot liquor tanks. With built in 1/2" MPT threads installation is simple in our Texas Brewing Inc line of Brew Kettles, or can be installed in any 1/2" drilled hole using locknuts, gaskets, and washers. Probe extends roughly 2", deep enough to get a good reading without becoming a hindrance to cleaning or stirring your vessel. Thermometer range is from 0-220ºF or -10-100ºC, and features a calibration screw on the back.

Additional Information

Free Shipping No
Tri Clamp Fitting Types No
Unit Type (eg: lbs) No
Lovibond No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Customer Reviews

Perfect thermometer for brew kettle Review by Joe
I ordered the thermometer and received it about 2 days later. I was prepared to check the calibration of it by using a pot of boiling water and another calibrated thermometer when it arrived. I did find it was about 8 degrees off, which made for an easy adjustment using the 'reset' screw located on the back of the casing. After the necessary adjustment, it was able to consistently provide me with the correct water temperature, from cold 51 degree water up to the boiling 209 degree water (varies due to local elevation). Great purchase for sure! (Posted on 2/2/2017)

Write Your Own Review

Only registered users can write reviews. Please, log in or register


You have no items to compare.