Welcome to Stubby's Texas Brewing Inc.

Top

Zoom

Toggle Block Social

Details

These custom TBI 15 gallon stainless steel boil kettle assembly kit including a 1/2" stainless steel ball valve, 1/2" ID hose barb, matching lid, and a 2" long threaded bi-metal thermometer. All in 1/2" inch NPT welded ports so you can avoid leaky weldless fittings. Plus, each is stamped with graduated gallon marks on the back of the kettle for easy measurement of your strike water and wort (unfermented beer). The handles are riveted in place to ensure a long life and easy carrying. Wall Thickness 1 mm 13.7" Diameter X 19.4" Tall. Ready to go now as a boil kettle or hot liquor tank. Add a false bottom to create a mash tun or combo pot.

See related items for more information. Assembly required.


This item does not qualify for flat rate shipping!
 

Additional Information

Free Shipping No
Tri Clamp Fitting Types N/A
Lovibond No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Customer Reviews

Best Value Out There Review by Brandon
Rating
If you have shopped stainless kettles at all, then it should be obvious right away what a fantastic price this is for a fully dressed out 15 gallon kettle. While these are a little lighter gauge metal than some of the expensive brand names, I have brewed on mine several times now and I am VERY happy with the performance. I switched my boil kettle and hot liquor tank over to these from converted kegs recently, and here is what I have found:

1. They heat up a LOT faster than a keggle does
2. You have a lot more control over the intensity of the boil, and you can boil much harder with these, which really helps when using pilsner malts
3. My boil off is far more predictable. I get a consistent 1 1/2 gallon per hour whether I am boiling 5 gallons or 13 gallons. That was never the case qith my keggles.

These still have some metal polish on them from the factory, so make sure you clean them very well, but this is one of the best equipment buys I have made and I would highly recommend them to anyone. (Posted on 8/9/2016)
Buy 1 Review by Scott
Rating
I finally upgraded to a 15 gallon TBI. Guys it's worth the money. Especially if you're doing 5 gallon and wanting to do all grain. A 5-6 hour brew day is a workout for 5 gallons of finished product in 3-6 weeks. This 1 purchase and you've doubled capacity. (Posted on 8/9/2016)
Great Kettle Review by Tim
Rating
This is a great kettle for the price,while it is only single-ply bottom have never had a problem with scorching my wort. The welded fitting will give you peace of mind that they will not leak. A great value! (Posted on 8/9/2016)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Compare

You have no items to compare.

Community Poll

Have you tried our Avangard malts?